Free Delivery On All Orders Over £30 (UK Only)

0

Your Cart is Empty

How To Fit Your Home Sign Co Sign

We have tried to make it as easy as possible to fit your brand new sign. Following are the instructions on our different mounting options.

 

Flat Mounted 

If you have ordered your sign without any fixings, you can use any number of adhesives to attach your sign. The signs weigh from 150 to 500g so most adhesive glues, silicones or sticky pads should hold them fine.

 

Hidden Stand-Offs

image of stand offs

These hidden stand-offs allow you to keep the face of your sign clean with only the design visible.

 

Above is an illustration showing how the hidden stand offs work.

To Install:

  1. Attach the supplied mounting template to where you want to install your sign. Check it's level and that you will not do any damage to anything where you will be drilling.
  2. Drill holes using a suitable drill bit (not supplied) as marked on the template.
  3. Using screws and raw plugs suitable for your wall type (not supplied), attach the female stand-off to the wall. (Max screw head diameter is 9.5mm, max screw thickness is 5mm.
  4. Once all female stand-offs are secured, you can line up your sign, push until you hear the male stand-offs click into place.
  5. Your sign will now be installed.

 

Stainless Steel Stand-Offs

image of stand offs

These hidden stand-offs allow you to keep the face of your sign clean with only the design visible.

Above is an illustration showing how the stainless steel stand offs work.

To Install:

  1. Attach the supplied mounting template to where you want to install your sign. Check it's level and that you will not do any damage to anything where you will be drilling.
  2. Drill holes using a suitable drill bit (not supplied) as marked on the template.
  3. Using screws and raw plugs suitable for your wall type (not supplied), attach the female stand-off to the wall. (Max screw head diameter is 7mm, max screw thickness is 5mm.
  4. Once all female stand-offs are secured, you can put the male stand offs through the sign.  Ensure you use the supplied plastic washers on the front and back to prevent damage.
  5. Line the males up with the females, screw in until thumb tight.
  6. Your sign will now be installed.

 

 If you have any questions or would like to discuss another mounting option, please email us on shop@homesignco.com.